AVRminiV4.0 Tools and Examples

Guides:

• AVRmini V4.0 Quick-Start Guide - A brief getting-started guide for the AVRmini V4.0 board

Tools:

• ft-isp - FTDI ISP Programmer Utility
  Allows direct ISP programming of AVR processor via USB connection. No bootloader needed.
  To install and use ftisp:
  1. Download ftisp for your platform [here]
  2. Install FTDI USB driver
     
     Get drivers and installation instructions at: www.ftidchip.com
     • For Windows systems use the V2.xx.xx (CDM) driver
     • For other systems, use the D2XX driver
  3. AVRminiV4.0 board must be connected to PC via USB.
  4. Pins 13&15 of USB I/O header must be connected with a shorting block.
  5. Open a command prompt and run ftisp. Command line syntax will be printed.

Code Examples: **

• avrmini4test - Basic self-test application for AVRminiV4.0 hardware
• netexample-avrmini4 - Simple UDP send and receive demo for AVRminiV4.0 (with lots of comments)
• nettest-avrmini4 - Complex example network application for AVRminiV4.0
• MMC/SD Card App - Example test application for accessing MMC/SD cards

** Note: Examples require a current version of AVRlib available [here].